Daltile Retro Round Bold White Gloss 1" x 1" Porcelain Mosaic Tile for Pool, Bathroom, Kitchen, Backsplash. Nostalgic with a contemporary twist, Retro Rounds brighten up walls, backsplashes and even pool linings. From Cherry Red and Orange Soda to Cobalt Circle and Daffodil Yellow, 13 vibrant color options make up this delightful collection including a classic polka dot option. Complementary matte finishes extend this retro look to the floor.
Great for contemporary or traditional spaces:
Mix of classic and contemporary colors
Timeless penny round shape
Multitude of options:
Available in gloss and matte finishes for use on the floor and wall
Beautiful color varieties to match any space
|Sheet Size :
||12 7/16" x 11 9/16" (Approx. 12" x 12")
||3/16" or 5mm
||Glossy & Shiny
Matte colors only suitable for residential and light commercial floors not subject to outside foot traffic.
Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
Local Pick Up:
Dallas, TX and Baltimore, MD. Please call to make pick up appointments.
Place your items in the cart and go to check out our discounted shipping options. If you feel none of the shipping options are working out for you, there is no need to worry please call us at 1 888 908 6699 and our sales team will work out a economical custom shipping solution for you.
Upon Receipt of Goods:
All orders must be inspected by the customer for any possible shortages or damage upon customer ft. receipt of goods. Do not use or throw away any damaged items since damaged items will be inspected
At the Time of Installation:
Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation. Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.
Inspect all Mosaic Tiles before installation. Prior to installation, tile must be approved by the customer. No claims of color or texture will be honored after installation. It is recommended to blend Mosaic Tiles from different boxes when installing.
Polished tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF Acutest method. Tiles with DCOF Acutest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall or personal injury. See ANSI standard A137.1 section 220.127.116.11.10, available at www.tileusa.com. Since there is shade variation in all products, the tile supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. For additional information, refer to “Factors to Consider” at daltile.com/Factors.